How To Clean A Dryer? Cleaning your Dryer on a monthly basis increase its working efficiency and lifetime. But doing it in a wrong way can end up in a disaster. So you need to be very careful while cleaning your dryer at home.
According to NFPA (National Fire Protection Association) dust, cloth fibers and lint can lead to a fire in home dryers. So do not underestimate cleaning your home dryer timely.
Some Helpful Tools To Clean A Dryer
There are some common tools you can use to clean your clothes dryer. If you don’t have these tools you can easily buy it from any grocery store.
- Soap and Water
- Metal duct tape
- Vacuum Cleaner with multiple attachments
- Old Toothbrush
- Cleaning Brushes with a drill.
Important Pre-Cleaning Tips
- First of all, read the manufacturer’s instructions thoroughly.
- Follow all the precautions mentioned in the instructions.
- Clean your dryer lint after every load.
- Clean your dryer vent within 3 to 6 months for better performance.
- Use warm water to clean the inner lint of your dryer.
How To Clean A Dryer At Home? Step By Step Guide
Cleaning your dryer is a little bit more difficult than cleaning your washing machine. Arguably, its a lot more important to clean your dryer. Because lint is a flammable material and if it touches the heating coil it can be a lot worse you could imagine.
Step # 1
Unplug your dryer for safety purposes. Take out the lint trap and clean it with a roller brush.
Step # 2
Take the discharge hose from the back of the dryer and give it a good shake to remove any debris caught in there. You can also use a cleaning brush with a drill to make sure it’s completely clean.
As we know all dryer are created differently. So I would recommend you to consult your manufacturer’s instructions.
Step # 3
The next step is to unscrew the back panel of your dryer and pop it off. When you remove that you’ll likely see a ton of lint on the base in the canal leading to the discharge line.
Vacuum this up and use a brush attachment or crevice tool to get into difficult to reach areas.
Step # 4
After then vacuum out the discharge hose. Once it is done give it a quick wipe down using an all-purpose cleaner on a cotton cloth.
Step # 5
Now put everything back together again including panels, hoses and plug it back. Once this is done you’ll notice your dryer will do much hotter and more effective cycles.
Step # 6
The next step is to clean the vent of your dryer. Use a cleaning brush with a drill and insert it into the hose section of the dryer.
Scrub it nicely to remove all the lint and dirt stuck inside the hose. After that, you can use a vacuum cleaner to soak out all the dirt in the hose.
Step # 7
You can clean the dryer from the inside. If you find any stains inside the dryer you can use baking soda or vinegar to remove those stains.
Mix it with hot water that will help you scrape out all the stains of gums, candies, and crayons inside the dryer.
Step # 8
To remove crayon spots you can also use dish soap to remove a melted crayon in the dryer. WD-40 is the best solution to remove any kind of rusty stains. While using it you need to be very careful because it is inflammable.
Step # 9
Some Ink spots can be extremely frustrating. To remove those ink stains you can use the magic eraser. Put some liquid on a towel and rub it on the affected area of the dryer and the ink stains will be removed easily.
Finally, your dryer is safer to use. Before you turn it on make sure all the parts rejoined perfectly. I hope you like my post about “How To Clean A Dryer?”. You can also read some more interesting posts here: